超薄交替銼

These are the files for the reworked coin box, the missing faction lid and the new ghost box that fit in with Lechugaa's Hyperborea game files. I also just added a lid that fits on the two end bi on the cube bin. I posted a make if you want to read about my thoughts on the whole build. The four files I uploaded are explained below: Ghost box: This is a new file I created by splitting the existing coin box in half horizontally. I put a 1mm thick rectangle (3mm per side smaller than the box dimeio) on the bottom that fits into a similar sized recess on the coin box below it. UPDATE: This file had the bottom rectangle not part of the rest of the model. This has been fixed in the current file) Coin box: For the coin box I redid it from scratch copying Lechugas design but just adjusting the size of the storage area to fit my coi. The original was too small to fit mine both in length and width and the divide were in the wrong spots for my set. In the process I realized it was big enough I had room to split it in half and make a second box to hold the ghosts which I didn't see a place for in the original files. I put in a 1mm thick recess in the top with a 3mm border so the ghost box can slide into place and stay put. Triangle Lid: Lechugas files only have lids for five of the six factio. I made one for the sixth which is the one with the three triangles. There was an issue with my file originally. There was a small space between the triangles and the box lid so after printing I had to glue them on as they fell off. There is a new file here now that isn't perfect but the triangles are now incorporated. After storing the game sideways I had cubes falling out of the two end bi of the U shaped cube holder. So I made a lid that clips in nicely to each of the end bi and has a low enough profile it doesn't mess up how anything else fits.