Speed Stacking 疊杯

十年前的一個想法，一直在內心深處，而今日完成這個圓夢計畫。 本次作品是競技疊杯，本來是想製作迷你杯的，但是建立完3D後發現這樣子杯子的壁厚太薄了，於是一直放大放大，最終它會略小於比賽用杯，因為列印數量眾多因此我希望它可以盡量的小。 至於為何不再小一點，這是因為疊杯是要能夠堆疊與收合的，在這樣的前提下只單純增加杯內或杯外的厚度，看似可行但會發現反而會有干涉問題，如果要避免干涉問題壁厚就會變得非常薄，這樣子的話列印會失敗的。 我是以常見的0.4噴頭為基準做設計的，建議壁厚至少要有0.8mm，但我覺得最佳的應該是1.2，就是三層的噴頭尺寸的壁厚這樣印起來是比較漂亮的，但礙於列印時間我讓杯體是0.8X厚度。 這是趣味性製作喔，就僅是自己喜歡的疊杯自己做，如果真的要拿來比賽要買原廠認證專用杯才可行的，且這印完之後杯體是有點軟的摔到容易破，如果想要印的漂亮或堅固一點的，建議更換噴嘴0.2或0.1去列印並記得去調整參數設定，這樣壁厚就能更多黏得更牢固一些，不過我覺得應該只會改善外觀而已，結構應該還是偏軟。 An idea ten yea ago has been deep in my heart, and today the dream plan is completed. This work is a competitive stack of cups, I originally wanted to make a mini cup, but after creating 3D, I found that the wall thickness of such a cup is too thin, so I have been zooming in, eventually it will be slightly smaller than the competition cup, because the number of prints Many so I hope it can be as small as possible. As for why it is no longer smaller, this is because the stacked cups can be stacked and folded. Under this premise, only the thickness of the iide or outside of the cup is simply increased. It seems feasible but it will find that there will be interference problems. To avoid interference problems, the wall thickness becomes very thin, and printing will fail. I designed it based on the common 0.4 nozzle. It is recommended that the wall thickness should be at least 0.8mm, but I think the best should be 1.2, that is, the wall thickness of the three-layer nozzle size is so beautiful to print, but Due to the printing time, I made the cup to be 0.8X thick. This is fun making, just make your own stacked cups. If you really want to use it for the competition, you need to buy the original certified special cup. It is feasible after the printing, and the cup body is a bit soft and easy to break after printing. If you want to print beautiful or strong, it is recommended to replace the nozzle 0.2 or 0.1 to print and remember to adjust the parameter settings, so that the wall thickness can be more sticky and firmer, but I think it should only improve the appearance. , The structure should still be soft.