迷你滑翔機“KAWASEMI”[BFX17-UNFYT]；1.5版

Mini Glider "KAWASEMI" [BFX17-UsNFYT] ver.1.5 (Update 06-21-2020) Palmtop size. Outdoor flight ready! Flight is possible if wind speed is 3 m or less. The T type has two fi characteristic of the head. The BFX17 series has a slightly thicker main wing than the BFX16 series. Print setting The recommended slicer is "Ultimaker Cura". 1)It's possible to output the printer modeling size in more than 110 mm of 140 mm. 2)Please use a material of the same weight as a ABS filament or ABS. 3)Print Layer Height 0.05mm exclusive use 4)Nozzle diameter :0.3mm recommendation 5)Infill:Grid pattern / Deity25%(standard) 6)Build Plate Adhesion Type:Skirt Optional parts_____ Display Stand Launcher Adjustment hooks Cutter_scraper for all 3D printer "KAWASEMI" [BFX16-UsNFY] ver.1.5 Thank you. 迷你滑翔機“翠鳥”[BFX17-UsNFYT]ver.1.5 是原創設計的橡膠午餐式3D印刷滑翔機。 T型的頭部有兩個特征性的指紋。 BFX17系列比BFX16系列稍微主翼厚一點的設計。 具有類似鳥的M型主翼和U型尾翼、多層疊層翼截面、雙絞架等特征。 應對戶外飛行。（可飛行到風速3米） 因?yàn)槭鞘终拼笮。⌒虯BS對應3D打印機也可以輸出。 也可以輸出ABS規格的BS01和idbox。 必須輸出層疊厚度為0.05mm，但由于較小，輸出時間較短。 詳細內容已添加到壓縮文件中。 Thank you.