Turning a Flashlight into a Headlamp 把手電筒變頭燈

A small connector that attaches a flashlight to a belt, turning it into a headlamp. In my case, a bike headband was used as the belt and it work well. However, I think any type of belt you have in hand should serve well, too. Since I'm tying it to my head, I used flexible filament (TPU) to provide more comfortability. And as I didn't flatten the contacting-surface, using hard material (eg. PLA) might hurt your body, so use it at your own risk. One last thing, the stl file provided has a 25 mm inner-diameter for the flashlight holder. According to the flashlight you are using, you might need to modify this dimeion. For this, f3d file (for Fusion 360) is provided as well. 一個用來把手電筒固定到帶子上的小零件，用來自製頭燈。 我用腳踏車頸套當作帶子，效果還不錯。不過，你手邊的任何帶狀物應該都可以用才對。 因為要綁在頭上，所以我使用軟料（TPU）來列印，應該會比較舒適一些。也因為打算用軟料，所以小零件和身體接觸的部分在畫的時候並沒有特別弄平，如果用硬質材料（例如PLA）來列印，穿戴時可能會弄傷自己，請自己評估風險。 最後，提供的stl檔案在固定手電筒的部分內徑是25 mm，但根據你使用的手電筒，這個部分很可能需要修改。為此，也提供了f3d檔案，可以匯入Fusion 360軟體來做調整。