multi-purpose no touch tool 無接觸工具

作品起源自於Thingivee網站上發起的無接觸工具設計挑戰，因此來發想這次的設計，要多功能又?jǐn)y帶便利的話，接觸的定義大部份都是由人的手來執行，因此想到要結合手部的一種設計，讓它可以更貼近使用者的需求。 因此它是可以用來開門把以及按電梯按鈕，也可以用來拿紙鈔及硬幣，或者是拿書本、紙張杯子等等，可以大致上符合人經常會拿取的一些物品，零件側邊有凹槽可以固定橡皮筋或是鬆緊帶，用來與手部的手指做固定用的，除了左右手能共用以外，穿脫也不會太複雜，單手也可以使用的。 使用SolidWorks簡易指令建立3D檔案，並在內側製作咬花紋路增加摩擦力，以及運用絞鏈結構原理來設計這次的輔助工具，但表面仍然光滑因此需要泡棉膠帶來輔助，增加接觸的摩擦力。 The work originated from the contactless tool design challenge initiated on the Thingivee website, so I came to think of this design. If it is veatile and convenient to carry, most of the definitio of contact are performed by human hands, so I want to combine A design of the hand, so that it can be closer to the needs of use. Therefore, it can be used to open door handles and press elevator butto, and can also be used to take banknotes and coi, or books, paper cups, etc., which can roughly match some items that people often take. There are grooves to fix rubber bands or elastic bands, which are used to fix with the finge of the hand. In addition to the sharing of the left and right hands, the putting on and taking off is not too complicated, and it can also be used with one hand. Use SolidWorks simple itructio to create a 3D file, and create a bite pattern on the iide to increase friction, and use the hinge structure principle to design this auxiliary tool, but the surface is still smooth, so foam tape is needed to assist and increase the contact friction.