Ender3通用近程擠出機支架_ General direct drive extruder mount for Ender3

設計用途兼容大多數擠出機的Ender3系列3D打印機近程擠出升級支架。設計思路1． 可適用于市面上的大多數擠出機和Ender3全系列（特別是V2）2． 便于安裝——幾乎不需要拆卸打印機（只要擰松兩顆螺絲）3． 方便打印——盡量減少支撐、提高打印質量、減少打印失敗概率4． 盡量利用原裝組件螺絲螺母X軸支架：2個M2X10螺絲和螺母（可選）平臺：4個M4X6螺絲,2個M3X6螺絲和M3X6銅螺母預埋件（可選）BLtouch支架：1個M4X8螺絲和螺母X軸限位調節：1個M3螺絲我的第一個Fusion360作品（不是）。真正的第一是一個貓罐頭的蓋子……（防止沒吃完的貓罐頭在冰箱里串味）注：照片是前一個版本的，但是安裝過程類似。TargetA general direct drive mount upgrade for Ender3 series.(Especially Ender3 V2)Principles1. Compatible with most extrude and Ender3 series2. Easy to itall——Almost no need to disassemble the printer (just loosen two screws)3. Easy to print——Minimize support, improve print quality, and reduce the probability of failure4. Try to use original componentsScrews and nutsX mount： M2X10*2 screws and nuts（Optional）Platform：M4X6*4 screws, M3X6*2 screws and M3X6*2 knurled nut（Optional）BLtouch mount：M4X8 *1 screw and nutX limit adjust：M3*1 screwThis is my fit Fusion360 you like ：Some photos are from the previous veion, but the itallation process is SettingsPrinter brand:CrealityPrinter:Ender 3Rafts:NoSupports:YesResolution:0.2mmInfill:20Filament brand:CrealityFilament color:OrangeFilament material:PLA