轉塔銑床

This is based on real turret milling machine,I made it to a 3D print veion with some dimeional tolerance adjustment. It comes with 25 parts,weight about 650g,(with 10% infill,1.2mm shell thickness & support material) I sugget use 210x210x210mm (or above)print platform printer, print those parts one by one to get better parts are interference fit,might need some sanding progress. The ''B3''&''B4'' , ''D7''&''D9'' are bolts and nuts, when you assemble them don't screw them too tight or it might broke or crack. With lots of combination parts, different machine, material, software setting might affect the final result. I highly suggest you to print some test parts to make sure the size is accurate to work well, then print this milling machine to avoid printing failure & waste your filament. 此作品是參考銑床的機構進行設計，我設計一些適合3D列印的零件加入其中，並搭配大部分3D列印產生的尺寸公差做零件的尺寸調整。 此成品包含25個零件，總重量約650g(10%填充，1.2mm壁厚，含支撐材料)， 適合210mm210mm210mm以上機臺列印，建議一次只列印一個零件，有幾個零件設計為緊配合，可能需要稍微磨過，B3-B4與D7-D9，結合時，需要稍微用力但又不可過於大力的鎖緊，否則螺牙會損毀。 這件作品有許多的組合裝置，但每人的機臺、材料、軟體參數都可能會影響最終成品的功能，因此，建議您先列印我製作的測試件，確保能正常運作，再來列印此作品，降低成品的失敗機率與材料的浪費。 Test: A parts: B parts: C parts: D parts: STEP File: Video: